adafruit_bme280
- Adafruit BME280 - Temperature, Humidity & Barometic Pressure Sensor¶
CircuitPython driver from BME280 Temperature, Humidity and Barometic Pressure sensor
- Author(s): ladyada
-
class
adafruit_bme280.
Adafruit_BME280
[source]¶ Driver from BME280 Temperature, Humidity and Barometic Pressure sensor
-
altitude
¶ The altitude based on current
pressure
versus the sea level pressure (sea_level_pressure
) - which you must enter ahead of time)
-
humidity
¶ The relative humidity in RH % returns None if humidity measurement is disabled
-
iir_filter
¶ Controls the time constant of the IIR filter Allowed values are the constants IIR_FILTER_*
-
measurement_time_max
¶ Maximum time in milliseconds required to complete a measurement in normal mode
-
measurement_time_typical
¶ Typical time in milliseconds required to complete a measurement in normal mode
-
mode
¶ Operation mode Allowed values are the constants MODE_*
-
overscan_humidity
¶ Humidity Oversampling Allowed values are the constants OVERSCAN_*
-
overscan_pressure
¶ Pressure Oversampling Allowed values are the constants OVERSCAN_*
-
overscan_temperature
¶ Temperature Oversampling Allowed values are the constants OVERSCAN_*
-
pressure
¶ The compensated pressure in hectoPascals. returns None if pressure measurement is disabled
-
relative_humidity
¶ The relative humidity in RH % returns None if humidity measurement is disabled
-
standby_period
¶ Control the inactive period when in Normal mode Allowed standby periods are the constants STANDBY_TC_*
-
temperature
¶ The compensated temperature in degrees celsius.
-